Drift · 2026-03-08
Xbox stick drift
Series and One sticks are potentiometers. A Hall-effect swap is a repair, not something Windows can detect by name.
What to check first
Measure on the Xbox tester with the pad flat. The Xbox Accessories app can update firmware and, on some models, run Microsoft’s own stick check. It does not print the Gamepad API radius this site uses, so retest here after the app finishes.
- 0B12 is the usual Series USB id. One pads use older ids.
- A bad micro-USB port on older One pads looks like drift when the cable moves.
- Elite paddles are often missing from the standard button list.
Confirm the reading on the live tester before you buy parts or change firmware. The number on that page is what your browser actually receives.
A practical next step
Repeat the same test after each change and write the resting radius down. A fix that does not move that number did not fix the sensor. If the offset stays above about 0.12 with your hands off the sticks, plan a module replacement rather than another software pass. Model notes live in the controller library.
Frequently asked questions
Does this page change my controller?
No. GamepadTesters only reads the Gamepad API in your browser. Calibration writes, firmware updates, and stick swaps happen in the maker’s tool or at a repair bench.